Starting Your Spa on Pristine Blue

STARTING UP ON PRISTINE BLUE

1.  Drain the spa and refill. Replace or clean the filter thoroughly.

2.  Balance the water.

· Total Alkalinity  50-90 ppm

· Ph 7.2 to 7.6

·  Calcium hardness 100- 300 ppm

3.  Add 10 millilters of Pristine Check per 100 gallons of water. Circulate 2 to 4 hours.

4.  Shock with 5 milliliters ( or 1 teaspoon) of PristineExtra per 100 gallons of water. Circulate 2 to 4 hours.

5.  Clean the filter.

6.  Add 6 milliliters of PristineBlue per 100 gallons of water. Run the filter for 1 hour.

After each use of the spa, shock with 5 milliliters (or 1 teaspoon) of PristinePower per 100 gallons of water, not to exceed once per day. (make sure to have the jets on, and run them about 10 to 15 minutes, so the PristinePower will not drop to the bottom)

EVERY 2 WEEKS

1.       Balance the water.

2.       Test the PristineBluelevel and add according to the Spa Dosage Chart.

3.       Add 1 mililliter of PristineClean per 100 gallons of water

4.       Add 1 milliliter of PristineClear per 100 gallons of water

5.       Add 5 milliliters (or 1 teaspoon) of PristinePower per 100 gallons of water.

6.       Filter for 4 to 6 hours and then clean the filter media.